Our Product
Filtration Solutions for Laboratory and R&D
Purification and separation technology plays vital role in laboratory based
research, development, analytical preparation and diagnostics applications.
PoreTek offers a range of innovative products to cater easiness in filtration
and purification processes.
PoreDisc Syringe Filters
Simplify the analytical preparation with PoreDisc series of syringe filters, available in Nylon, PVDF, PES, PTFE and MGF for general laboratory use and chromatography use. These syringe filters are widely been used in quality control lab & analytical R&D lab.
- Offered with highest EFA (effective filtration area) to achieve high flow rate
- Assured for high end chromatography application like HPLC,UPLC,LCMS/MS, GCMS, ICPMS
- Unique channel design to achieve low hold up volume (<25µl/40µl) with high throughput
- Each lot release has passed the PDA TR <26> qualification criteria
- 100 % Integrity Assured
- Leachable assurance upto PPT level analysis
- Negligible extractable <USP 661>
- Ready for Chromatography use and General Laboratory Use
- Available in 0.1 µm/0.2µm/0.45µm/1µm/5µm pore rating
- EO Sterile and Non – sterile
- Dual layer syringe filters also available with pre-filter
- Negligible adsorption in biological sample filtration with PVDF syringe filters for high product recovery
- Assured for Microbial retention (0.2µm/0.45µm ) as per ASTM & PDA TR 26 qualification
Membrane Filters
Among analytical preparation, mobile phase filtration in chromatography analysis is critical to assure test results and also important for instrument and Chromatography column life. Similarly, in biological sample filtration product yield is very crucial as adsorption and sample loss are major concern. Membrane filter performance and quality matters in Sterility Test and microbiology analysis. Membrane disc filters are available in 13 mm, 25 mm, 47 mm and 90 mm disc formats, used in laboratory and research formulation purification & filtration.
- Nylon and PVDF membrane disc filter (0.2µm/0.45µm) available for mobile phase filtration
- Cellulose Nitrate, Gridded cellulose nitrate membrane disc filter (0.2 µm/0.45µm/0.8µm/1.2µm/5µm and PVDF membrane disc (0.2µm/0.45µm) for sterility test and microbiological analysis
- Uniformity in pores offered consistency in high flow and high throughput
- Each manufacturing lot has been passed through stringent quality criteria as per PDA TR <26>
- 100 % Integrity Assured
- Leachable/Extractable assurance <USP 661>
- Available in EO Sterile and Non – sterile
- PVDF membrane disc for biological samples for protein recovery
Glass Fiber Disc Filters
PoreTek microglassfiber filters (PGF1/2) are composed of 100% borosilicate glass fibers and widely been used in laboratory for general filtration to separate colloidal solutions. PGF act as pre-filter to membrane filters to remove larger particles.
- Offered with high dirt hold capacity
- High retention efficiency
- Wider chemical compatibility
- Biological inertness
- Available in nominal rating of 0.6 µm, 1.2 µm & 2 µm
- Variable sizes 25mm, 47 mm , 90mm, 100 mm , 142 mm & 293 mm
- Environmental analysis
- Water sampling
- General lab filtration
- Gravimetric analysis
SteriPour Filter Funnel – Microbiology Use
SteriPour Filter Funnels permits the effective filtration steps required in microbiological analysis. PoreTek SteriPour filter funnel exists in pore rating of 0.2 μm & 0.45 μm in 125 mL capacity & remove microorganisms, particles, precipitates, and un-dissolved solid particles larger than 0.45 and 0.2 micron from aqueous solutions. FDA complaint materials has been used for manufacture. These ready to dispose filtration device consist of a hydrophilic gridded cellulose nitrate membrane filter or PVDF, PP (polypropylene). Also, available with edge hydrophobic cellulose nitrate membrane.
- Incorporated gridded CN Membrane /PVDF filters offers High flow rate upto 260ml/min at normal vacuum
- All plastic components are well certified for extractable
- ISO 7704 certified
- Easy to fit in universal manifold and adaptor
- Best in class to offer wider volume range upto 125 ml and each marked volume are calibrated and certified upto 0.5- 1% accuracy
- Cost-effective solutions in comparison to top leading suppliers
- Products meets global requirement and CE certified
- Offers high hydrophilicity so that user can experience easiness during transfer of membrane filter in media petri dish
- Assured for Microbial retention (0.2µm/0.45µm ) as per ASTM & PDA TR 26 qualification
- SteriPour funnels are also available with Edge hydrophobic cellulose nitrate membrane to facilitate the microbial analysis of sample containing bacteriostatic agents
Benefits:
– Ready to use; Plug-and-play concept
– No special preparation Required
– No washing need
– No autoclaving need
– No Clamps required
– No Breakage
– Risk-free membrane Wrinkling
– Consistence in performance
Address
Address: 6-16/1 Savarkar Nagar, Nr Nacharam X road PO-IE Nacharama,
Medchal Malkajgiri Hyderabad Telangana 500076
Phone: +91 83078 49907
Enquiry: info@poretek.com
For sales : sales@poretek.com
Quick Links
Home
About
Service
Blog
Contact
About
“We are committed for Quality”
Good quality either in product or in scientific data, is always be the utmost priority for scientist, individual, and organization.
PoreTekTM was founded in 2018 with a strong commitment to science to deliver best in class products with cutting edge solutions.