Environmental Product Portfolio
Clean and safe environment is a pre-requisite for good health and quality life. Testing of water samples and air monitoring are important task to comply the quality production in food, pharmaceutical, automobile industries.
PoreTek emphasize to provide quality products for water sample and air quality testing across various industries. A range of filtration products available to fulfill the requirement of every environmental testing lab.
PM 2.5 Air Monitoring Filter – EPA (Efficiency Particulate Air)
PoreTek PM 2.5 PTFE membrane filters are designed for PM 2.5 ambient air quality monitoring. Thin filters are made up of high-purity PTFE membrane (2 µm) with chemical resistant support rings. These air sampling filters conform to pTFE filters for EPA PM 2.5 Ref. method under the requirement of 40 CFR part 50.
- Support ring for robotic air sampling and traceability
- Offered with 46.2 mm diameter
- Low mass value for accurate gravimetric analysis
- Individually marked
- Retention >99.7%
Microglassfiber Filters (PGF)
PoreTek microglassfiber filters (PGF1/2/3/4) are composed of 100% borosilicate glass fibers and widely been used in laboratory for general filtration to separate colloidal solutions and air sampling. Offered with high dirt hold capacity. Applicable for PM 10 air sampling with 203 mm x 254 mm (8 x 10 inch).
- High retention efficiency
- Wider chemical compatibility
- Biological inertness
- Available in nominal rating of 0.7 µm (PGF3), 1.2 µm (PGF2), 1.6 µm (PGF2) & 2 µm (PGF4)
- Variable sizes 25mm, 47 mm, 90mm, 100 mm , 125 mm & 8 x 10 inch
- Environmental analysis
- Water sampling
- General lab filtration
- Gravimetric analysis
- Air monitoring
Cellulose Extraction Thimble (CET)
PoreTek Cellulose Extraction Thimble are composed of high alpha cellulose cotton linters and offers good retention efficiency and strength.
- Offered with high purity for better and reliable results
- Accuracy in dimension to be suitable for soxhlet /tecator type extraction system
- Useful for environmental monitoring
- Applicable for estimation of fats in food matrix
- Minimal ash content <0.1%
- Size accuracy upto +/- 1 mm
- Available in variable sizes
Micro Glassfiber Thimble (GFT)
PoreTek GFT Thimble are composed of high purity borosilicate glass fibers and free form binders and additives that makes them to be use at 500 ºC. They have been used in solvent extraction systems where cellulose thimble are incompatible. Mainly use in stack monitoring with high retention upto 0.65 µm.
- Offered with high purity borosilicate glass fiber for better and reliable results
- Accuracy in dimension to be suitable for soxhlet /tecator type extraction system
- Useful for aggressive solvent extraction system
- Majorly used in smoke stack gas monitoring, grease and oil analysis, pesticide analysis
- Size accuracy upto +/- 1 mm
- Available in variable sizes
Glass Vacuum filtration Assembly
Poretek Glass Vacuum filtration assembly is meant for mobile phase (solvents) filtration for HPLC application, microbiological buffer filtration, removal of particulate over the surface of membrane disc filters.
- Available with 1ltr /2 ltr capacity, filter support base with sintered glass filter to mount 47 mm membrane disc
- High quality borosilicate glass assembly
- Fast and easy filtration
- Quick fit with easy clamping
- Integral vacuum connection to avoid contamination
- Anodised aluminum clamp for longer life
Address
Address: 6-16/1 Savarkar Nagar, Nr Nacharam X road PO-IE Nacharama,
Medchal Malkajgiri Hyderabad Telangana 500076
Phone: +91 83078 49907
Enquiry: info@poretek.com
For sales : sales@poretek.com
Quick Links
Home
About
Service
Blog
Contact
About
“We are committed for Quality”
Good quality either in product or in scientific data, is always be the utmost priority for scientist, individual, and organization.
PoreTekTM was founded in 2018 with a strong commitment to science to deliver best in class products with cutting edge solutions.